Huawei h31-311 practice test

HCIA-Transmission V2.0 Exam


Question 1

During the service configuration between two adjacent sites (NE1 and NE2), if VC4:1 and VC12:l-3
are used on the NEl's line board connected to NE2, the same VC4 and VC12 timeslots must be used
on the NE2's line board connected to NE1.

  • A. TRUE
  • B. FALSE
Answer:

A

Discussions

Question 2

After an optical fiber is connected according to the networking diagram, if a critical alarm is reported
on the optical port, the SRV indicator on the line board is red.

  • A. TRUE
  • B. FALSE
Answer:

A

Discussions

Question 3

Which of the following overhead bytes needs to be processed at an electrical regeneration site?

  • A. PM
  • B. SM
  • C. All of the above
  • D. TCM
Answer:

C

Discussions

Question 4

Which of the following are different types of ESCs divided by implementation principles?

  • A. Inserted DCC
  • B. Fixed frame structure DCC
  • C. None of the above
  • D. Pilot tune DCC
Answer:

A, B

Discussions

Question 5

Which of the following operating systems support the installation of the U2000 client?

  • A. Windows
  • B. Solaris
  • C. SUSE Linux
  • D. All of the above
Answer:

D

Discussions

Question 6

When a VLAN-based service type is configured, which of the following functions must be enabled on
the port?

  • A. Auto-negotiation mode
  • B. Flow control
  • C. Entry detection
  • D. Broadcast packet suppression
Answer:

C

Discussions

Question 7

Which of the following is the functional unit that provides the interfaces related to the orderwire
phone and serial data for the system?

  • A. Auxiliary unit
  • B. Line unit
  • C. Tributary unit
  • D. Cross-connect unit
Answer:

B

Discussions

Question 8

The OSN 1500/2500/3500/7500 supports both DC and AC power inputs.

  • A. TRUE
  • B. FALSE
Answer:

B

Discussions

Question 9

In the system control unit, which of the following databases do not lose data after a power failure?

  • A. MDB
  • B. FDB0
  • C. FDB1
  • D. DRDB
Answer:

A, B, D

Discussions

Question 10

The rate of STM-1 is () bit/s.

  • A. 9*270*4*8000
  • B. 9*270*1*8000*16
  • C. 9*270*1*8000*8
  • D. 9*270*1*8000
Answer:

C

Discussions
To page 2