cisco 500-901 practice test

Cisco Data Center Unified Computing Infrastructure Design

page 1 out of 3

Viewing questions 1-15 out of 40


Question 1

Whatisthe purpose of a virtual switch?

  • A. Virtual switches manage storage requests from virtual machines
  • B. Virtual switches present NiCs to virtual machines for network connectivity
  • C. Virtual switches recommend QoS optionsto the hypervisor for network connectivity
  • D. Virtual switches present NICs to the UCSM for network connectivity
Answer:

B

Discussions
0 / 1000

Question 2

Which threeoptions can a virtual switch do? (Choose three.)

  • A. VLAN tagging is done in UCS Manager
  • B. Virtual Machines with a trunk port imposes the VLAN tag
  • C. Impose the VLANtag D Manage VLAN tag allocation
  • D. Set IP Class-of-Servicebits
  • E. Allow physical switch to impose the VLAN tag
Answer:

A B D

Discussions
0 / 1000

Question 3

An application isrunningin a datacenter as a set of virtual machines (VMs) running on a single physical host.The host is using
an NPIV enabled HBA.What capability does this offer?

  • A. Only the physical host can logically connect lo the SAN fabric, thus enhancing security
  • B. The number of FLOGIsis kept at areasaonablelevel, and therefore cannot saturate the SAN fabric
  • C. Inter VSAN traffic can be switchedby the HBA
  • D. Each VM initiator can be managed independently, since it will generate its own FLOGI, and have its own pWWN.
Answer:

D

Discussions
0 / 1000

Question 4

You arecreating Boot Policy to have your Cisco UCS Server boot from SAN. What option shows the correct process?

  • A. Include a vHBA in the Boot Order list, provide a Boot LUN ID, and provide the WWPN address for the Boot Target.
  • B. Include a vHBA in the Boot Order list, provide a SAN ID, and provide the WWPN address for the Boot Target.
  • C. Include two VHBAs in the Boot Order list (vHBA-A and vHBA-B for reduncy0, provide a Boot Lun ID for each vHBA, and provide the WWPN address for the Boot Target.
  • D. Include two vHBAs in the Boot Order list (vHBA-A and vHBA-B forredundancy), provide a SAN ID, and provide the WWPN address for the Boot Target.
Answer:

D

Discussions
0 / 1000

Question 5

Which ate two Application Gateways primary rotes? (Choose two)

  • A. Manage configuration changes during FSM transitions
  • B. Manage configuration changes made with UCS Manager
  • C. Communicate with virtual machines and report health and state
  • D. Communicate with end points and report their health and stale
Answer:

A C

Discussions
0 / 1000

Question 6

The MX Data Platform architectures uses which two data optimization features? (Choose two )

  • A. Non-disruptive RAID recovery
  • B. Inline data compression
  • C. Post-process data compression
  • D. Cluster -wide garbage collection
  • E. Inline data deduplication
  • F. Post-process data deduplication
Answer:

D E

Discussions
0 / 1000

Question 7

Which unique identify resources requires Stateless computing?

  • A. UUIDs, MAC Addresses and WWNs
  • B. VIANS. VSANS, Hypervisors and IP Addresses
  • C. Virtual IP Addresses
  • D. Service Profiles and Application Policies
Answer:

C

Discussions
0 / 1000

Question 8

Which is a gap of first generation hyper converged solutions addressed by Cisco HyperFlex?

  • A. Integrated networking configuration during deployment
  • B. Support for GPUs
  • C. Support for multiple hypervisors
  • D. Integrated firewall for security monitoring
Answer:

A

Discussions
0 / 1000

Question 9

Which Statement is time regardingvNIC Templates and IAN connectivity Policy?

  • A. Network identities for LANconnectivity policy must be pool derived
  • B. We can add VLANs to the vNIC template at any time
  • C. We do not need MAC address pool for vNIC Templates
  • D. vNIC templates must be created first and then used as a part of the LAN Connectivity Policy
Answer:

D

Discussions
0 / 1000

Question 10

An administrator has configured an NPV traffic map lot anew server interface, none of the uplinks the traffic map are
operational. What is the resulting action?

  • A. The traffic map will be disregarded and an uplink in the interface VSAN will be selected
  • B. The default VSAN uplinkwill be used if operational.
  • C. The server will remain in a nonoperationalstate.
  • D. The server interface will signal an FDISC message to the fabric switch.
Answer:

A

Discussions
0 / 1000

Question 11

In a OCS domain, the Storagerole contains storage related privileges, and the Server role contains server related privileges.
A user has joined the group that will need to have both Server and Storage roles.What does the UCS administrator need to
do in order to accommodate the new user?

  • A. Create one user account and assign both rotes to that account.
  • B. Create two login accounts for the user, one for each rote, since an account can only assign one role.
  • C. Create one user account and map it to a locate that contains both roles.
  • D. Create one user account, but and define two login domains, one for each role.
Answer:

B

Discussions
0 / 1000

Question 12

When primary functions are provided by VSANs?

  • A. independent fabric services pet VSAN and zoning
  • B. Software-based isolation of traffic and independent fabric services per VSAN
  • C. Hardware-based isolation of traffic and independentfabric services per VSAN
  • D. Specific driver configuration and FSPFrouting
Answer:

A

Discussions
0 / 1000

Question 13

Which two VSANs areautomatically created and cannotbe deleted? (Choose two.)

  • A. The Virtual Bridging VSAN
  • B. The Isolated VSAN
  • C. The Fabric Control VSAN
  • D. The DefaultVSAN
Answer:

A C

Discussions
0 / 1000

Question 14

Which Cisco UCS core element maintains the DCS XMLdatabase?

  • A. Cisco FiniteState Machine
  • B. Cisco Data Management Engine
  • C. Cisco UCS Manage
  • D. Cisco ApplicationGateways
Answer:

B

Discussions
0 / 1000

Question 15

What is a UniversallyUnique Identifier in the context of Cisco Unified Computing System?

  • A. A unique identifierused w identify an object of entity on the internet
  • B. Aunique identifier used in serverprofilesenabling servermobility
  • C. A unique identifier used in application profiles enabling server mobility.
  • D. A unique identifier used m serviceprofiles enacting server mobility
Answer:

A

Discussions
0 / 1000
To page 2