cisco 010-151 practice test

Cisco Certified Technician (CCT) for Data Center


Question 1

Which Cisco MDS 9700 Series platform supports the Supervisor-1E module?

  • A. Cisco MDS 9706
  • B. Cisco MDS 9709
  • C. Cisco MDS 9710
  • D. Cisco MDS 9718
Answer:

D

Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer-
directors/datasheet-c78-736317.html

Discussions
0 / 600

Question 2

A company wants to build a data center infrastructure which can provide up to 99.982% uptime availability per year. Which
ANSI/TIA-942 data center tier meets the requirement?

  • A. Redundant-distribution site infrastructure
  • B. Redundant-capacity component site infrastructure
  • C. Concurrently maintainable site infrastructure
  • D. Basic site infrastructure
Answer:

C

Explanation:
Reference: https://www.doc.ic.ac.uk/~jgiceva/teaching/ssc18-cloud.pdf page 16

Discussions
0 / 600

Question 3

Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server?
(Choose three.)

  • A. Decommission and acknowledge the blade.
  • B. Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
  • C. Reseat the memory DIMMs.
  • D. Check the CPU sockets for bent pins.
  • E. Reseat the blade in the same slot in the chassis.
  • F. Move the blade to another slot in the chassis.
Answer:

B E F

Discussions
0 / 600

Question 4

Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#

  • A. maintenance mode
  • B. EXEC mode
  • C. local management mode
  • D. global configuration mode
  • E. Cisco IOS mode
Answer:

B

Discussions
0 / 600

Question 5

Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #

  • A. Ctrl-C
  • B. Ctrl-L
  • C. quit
  • D. exit
  • E. end
Answer:

E

Discussions
0 / 600

Question 6

Which SAN protocol uses Ethernet network without IP encapsulation?

  • A. IFCP
  • B. FCP
  • C. iSCSI
  • D. FCoE
  • E. FC
Answer:

D

Discussions
0 / 600

Question 7

Where do you find the model number of a Cisco MDS 9200 Series chassis?

  • A. on the top front of the chassis next to the serial number
  • B. on the bottom front of the chassis next to the Cisco logo
  • C. on the top front of the chassis next to the Cisco logo
  • D. on the bottom front of the chassis next to the serial number
Answer:

C

Discussions
0 / 600

Question 8

Storage virtualization is commonly used for SANs in data centers to scale out the storage resources. The common methods
of storage virtualization include array-based storage virtualization. What are the other two methods? (Choose two.)

  • A. Host-based storage virtualization
  • B. Hypervisor-based storage virtualization
  • C. Embedded-based storage virtualization
  • D. Switch-based storage virtualization
  • E. Network-based storage virtualization
Answer:

A E

Explanation:
Reference: https://www.cioreview.com/news/implementing-storage-virtualization-for-efficient-data-management-nid-18073-
cid-86.html

Discussions
0 / 600

Question 9


Refer to the exhibit. Which item does D represent?

  • A. Pin icon (prevents Navigation pane from sliding)
  • B. Favorite icon (make any specific work pane in the application as your favorite)
  • C. To view the Navigation pane
  • D. Index Icon (view listing in alphabetical order)
Answer:

A

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/4_1/b_Cisco_UCS_C-
series_GUI_Configuration_Guide_41/b_Cisco_UCS_Cseries_GUI_Configuration_Guide_41_chapter_01.html

Discussions
0 / 600

Question 10

Which transceiver can support 400 Gigabit Ethernet?

  • A. QSFP-DD
  • B. QSFP+
  • C. QSFP28
  • D. SFP-DD
Answer:

A

Explanation:
Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/datasheet-c78-
743172.html

Discussions
0 / 600
To page 2