Axis anve practice test

Axis Network Video Exam Exam


Question 1

A P-iris lens is

  • A. An iris with higher light sensitivity.
  • B. Axis' standard for DC-iris.
  • C. A DC-iris with feedback.
  • D. An iris specially made for zoom lenses.
Answer:

C

Discussions

Question 2

In an Ethernet network, broadcast traffic is received and processed by

  • A. All devices on the network, making it unsuitable for network video since the network load would be unacceptable.
  • B. All devices on the network, making it suitable for network video since any device can access the video without any overhead from establishing a separate connection to the server.
  • C. Only those devices that have registered with the server to receive the traffic, making it unsuitable for network video, due to the overhead from establishing a separate connection to the server.
  • D. Only those devices that have registered with the server to receive the traffic, making it suitable for network video since the network load would be kept reasonable.
Answer:

A

Discussions

Question 3

In which cases would a people counting analytic be used with an Axis camera (Choose three)?

  • A. Fire protection in subways
  • B. Statistics for retail stores
  • C. Early warning system for flooding
  • D. Enhanced service levels for public transportation
  • E. Crowd detection for marketing purpose
Answer:

B, D, E

Discussions

Question 4

The purpose of DHCP is to

  • A. Allocate IP addresses to devices within a network.
  • B. Allocate MAC addresses to devices within a network.
  • C. Translate host names such as www.axis.com to IP addresses.
  • D. Translate host names such as www.axis.com to MAC addresses.
Answer:

A

Discussions

Question 5

DRAG DROP
Match the following descriptions to their proper IP rating below. Drag each gray box from the left
column to the matching blue box in the right column.

Answer:

Reference:
http://www.dsmt.com/resources/ip-rating-chart

Discussions

Question 6

An installation with an AXIS P1344 experiences image flickering. How can this be remedied?

  • A. Adding white light to the scene
  • B. Adding IR light to the scene
  • C. Changing the camera's exposure setting
  • D. Changing the camera's white balance
Answer:

C

Discussions

Question 7

To get the best accuracy for a people counting application for customers entering a store, the camera
should be mounted

  • A. Facing the entrance.
  • B. Facing the entrance at eye level.
  • C. Directly above the entrance.
  • D. Facing away from the entrance.
Answer:

C

Discussions

Question 8

What is the most effective and time saving way to adjust the focus on the AXIS M3204 camera while
onsite?

  • A. Remote zoom and focus feature
  • B. Adjust back focus
  • C. AXIS T8414 Installation Display
  • D. AXIS Camera Management
Answer:

C

Discussions

Question 9

Outdoor ready cameras in the AXIS Q60 Series typically works with 60 W PoE, if we connect it to 30W
PoE it will

  • A. Work for a limited time.
  • B. Give picture but impossible to pan and tilt.
  • C. Work but with limited temperature specification.
  • D. Work but with limited pan and tilt speed.
Answer:

C

Discussions

Question 10

Which of the following statements is a recommended best practice for outdoor installations of Axis
cameras?

  • A. Connect cameras and end points (midspan, endspan. network switch or hub) with Category 5e UTP cable
  • B. Ensure that a surge suppressor is installed in front of each camera
  • C. Ensure that the end points are properly grounded
  • D. Connect a UPS to the network switch
Answer:

C

Discussions
To page 2