Avaya 71300x practice test

Question 1

A customer reports that when using Presence services, the users cannot see the Presence status.
Which two tools are used to trace a PUBLISH message. In the Avaya Breeze server? (Choose two.)

• A. traceSBC
• B. traceCE
• C. traceSM
• D. tracePRS
• E. tracePS

Answer:

C,E

Question 2

Avaya Aura Presence Services 7.x is implemented on Avaya Breeze (formerly Engagement
Development Platform (EDP)).
When looking at Elements > Breeze > Service Management > Services, which status would you
expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?

• A. Accepting
• B. Loaded
• C. Installed
• D. Active

Answer:

A

Question 3

Which statement about the SIP Entities to support single node Avaya Aura Presence Services is
true?

• A. Only one SIP Entity is built of Type = “Presence Services”, which uses the SM100 IP address of the Avaya Breeze™ node.
• B. Only one SIP Entity is built of Type = “Avaya Breeze”, which uses the SM100 IP address of the Avaya Breeze™ node.
• C. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Presence Services”.
• D. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = “Avaya Breeze”, and the other is of Type = “Other”.

Answer:

B

Question 4

You are starting the process to create a server certificate so it can be installed in the Avaya Session
Border Controller (SBC).
What must be done before creating a server certificate for SBC?

• A. Generate a Certificate Signing Request (CSR) in SBC.
• B. Run initTM -d from SBC CLI.
• C. Add End Entity in Session Manager.
• D. Download a CA PEM file from System Manager.

Answer:

A

Question 5

You are creating the identity certificates that must be installed in the Avaya Session Border Controller
for Enterprise (SBCE).
Which statement about installing the certificate files in the SBCE is true?

• A. The cert file and the Key filenames generated by the Certificate Authority must match.
• B. Both the PEM and Key files must be in a zip file.
• C. The SBCE must be rebooted before the files installation.
• D. The cert file and the Key filenames generated by the Certificate Authority must be different.

Answer:

A

Question 6

What should be verified before running the initTM –f command on the Command Line Interface of
Avaya Breeze™ platform (formerly known as Engagement Development Platform (EDP))?

• A. Verify that Avaya Breeze™ is configured as a Managed Element in Avaya Aura® System Manager.
• B. Verify that an enrollment password is configured on System Manager and that it has not expired.
• C. Verify that a valid Certificate is installed on the Avaya Breeze™ instance.
• D. Verify that Avaya Breeze™ is licensed.

Answer:

B

Explanation:
See step 8 and step 9 below.
Repairing replication between Avaya Breeze and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya Breeze.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya
Breeze and Presence Services are displayed.
6. Select Avaya Breeze, and click Repair.
7. After 215 minutes, verify that the status of the Synchronization Status field is green. If not, go to
Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired:
a. Enter a password, and click Commit.
It is highly recommended that the same password must be used. Otherwise, Avaya
Breeze and Presence Services must be re-administered, because System Manager
Enrollment Password was configured during deployment of Avaya Breeze.
b. Open an SSH session to the Avaya Breeze Management Module IP address as sroot.
c. On the command line interface, enter initTM -f.
d. When prompted for the enrollment password, enter the password that you provided in Step 9a.
e. Repeat Step 1 to Step 6.
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1 (December 2016), page
223
https://downloads.avaya.com/css/P8/documents/101013646

Question 7

When looking at Avaya Aura® System Manager – Home > Services > Replication, what is the name of
the replica group representing the EDP / Avaya Breeze™ instances?

• A. CollaborationEnvironment_7.0
• B. Avaya Breeze™_7.0
• C. CollaborationEnvironment_3.1
• D. Engagement Development Platform EDP_7.0

Answer:

C

Explanation:
Confirming that Avaya Breeze successfully replicates with System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate your newly-deployed Avaya Breeze.
4. After 2 15 minutes, verify that the status of the Synchronization Status field is green/
Synchronized. If not, see Repairing replication between Avaya Breeze and System Manager
References: Avaya Aura Presence Services Snap-in Reference, Release 7.0.1, (December 2016), page
https://downloads.avaya.com/css/P8/documents/101013646

Question 8

If more than one Avaya Breeze node is available in the cluster, which statement about redundancy
and load-balancing is true?

• A. IM clients point to any Avaya Breeze™ node SM100 IP address. The client is dynamically informed of alternate Avaya Breeze™ nodes in the cluster.
• B. The list of all Avaya Breeze™ nodes SM100 IP addresses must be configured in the client.
• C. The Cluster IP address is not used for Presence Services in 7.0. IM clients configure a FQDN instead of IP address which is resolved by a DNS server to all Avaya Breeze nodes in the cluster.
• D. IM clients point to the Leader Avaya Breeze™ node SM100 IP address which redirects the clients to a particular Avaya Breeze™ node based on load-balancing policy.

Answer:

D

Explanation:
Enable load balancing for a cluster if you want to scale the HTTP services without targeting a
particular Avaya Breeze server. All the requests are sent to the cluster IP address. When you enable
load balancing, two Avaya Breeze servers are chosen as the active and standby load balancing
servers. The active load balancer distributes the HTTP requests to all the other servers in the cluster
in a round robin fashion.
References: Administering Avaya Breeze, Release 3.1 (May 2016), page 16
https://downloads.avaya.com/css/P8/documents/101014143

Question 9

Which statement about enabling IM and Presence for a user is true?

• A. In SMGR, edit the Communication Profile of the user to assign an Avaya E.164 handle and check the Presence profile checkbox.
• B. In SMGR, edit the Communication Profile of the user to assign an Avaya SIP handle and check the Presence profile checkbox.
• C. In SMGR, edit the Communication Profile of the user to assign a XMPP handle and check the Presence profile checkbox.
• D. In SMGR, edit the Communication Profile of the user to assign an Avaya Presence/IM handle and check the Presence profile checkbox.

Answer:

B

Explanation:
Communication Profile tab: Presence Profile
Fields include:
* The SIP Entity field used to route SIP based messages through the Presence Services.
* IM Gateway The IP address of the IM gateway
Note: Avaya SMGR stands for Avaya System Manager.
References: Administering Avaya Aura System Manager for Release 6.3.11 and later, Release 6.3
November 2016, page 554
https://downloads.avaya.com/css/P8/documents/101008185

Question 10

In the context of Avaya Aura® Presence Services 7.x, what is a Fetcher?

• A. It is a kind of watcher that requests a one-time view of the users current presentity information, but does not get future presentity information for a user.
• B. It is a user whose devices are sending status or presentity information on his behalf using a Publish message regarding his communication status.
• C. It is a watcher that is subscribing to current and future presentity information from another user.
• D. It is the presence information about a user that the system reports.

Answer:

A

Explanation:
Fetchers pull the value of presence information for a specific presentity from the presence service. If
a fetcher is fetching information on a regular basis, it is called a poller. Subscribers, on the other
hand, subscribe to presentity information on the presence service.