Page 1 out of 9. Viewing questions 1-15 out of 127
Question 1
On EOS 4.13.1F, which of the following statements are true in regards to Arista’s Tap Aggregation feature? (Select two)
A.
Tap ports are send only.
B.
Tap ports are receive only.
C.
Tool ports are send only.
D.
Tool ports are receive only.
Answer:
A,D
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 2
Where does Aboot look for the boot system image at boot time?
A.
At the location specified in the running-config
B.
At the location specified in the startup-config
C.
At the location specified in a file named boot-config on flash:
D.
At the location specified in a file named boot_config on flash:
Answer:
C
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 3
When ZTP is in enable node, what triggers ZTP when the switch boots?
A.
A missing or zero-byte SWI image.
B.
A missing or zero-clue administrator.
C.
A missing or zero-byte startup-config file
D.
A missing or zero-byte running-config file
Answer:
C
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 4
Which of the following are valid Event Manager triggers?
A.
on-boot
B.
on-schedule
C.
on-startup-config
D.
on-reload
Answer:
A,C
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 5
Which of the following Arista switch series’ supports Zero Touch Provisioning (ZTP)?
A.
7050
B.
7280E
C.
7300
D.
7500E
Answer:
D
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 6
Which command would you use to change the SSH Idle timeout after entering the ‘management ssh’ command?
A.
idle-timeout <minutes>
B.
timed <minutes>
C.
timeout <minutes>
D.
ssh-idle <minutes>
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 7
What would be the result of issuing a reload command on one of the two switches peered together in an MLAG domain where both switches are running EOS version 4.14.1F?
A.
Dual-homed hosts lose 50% of network capacity through the MLAG domain while the switch reboots
B.
The peer switch also reboots to ensure network stability.
C.
The peer switch sends out gratuitous BPDUs to let the network know that it has assumed the root- bridge role.
D.
Nothing bad ever happens when MLAG is enabled!
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 8
On an Arista switch, which port is used to connect a laptop to the switch for initial configuration or password recovery?
A.
Ethernet 1
B.
Console
C.
Management 1
D.
Ethernet 1/1
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 9
How many Arista switches may be a part of a single MLAG domain?
A.
2
B.
4
C.
8
D.
16
Answer:
A
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 10
Which of the following are not valid boot-config file entries?
A.
NETGW=192.168.1.1
B.
IMAGE-flash:EOS-4.12.1.swi
C.
SWI=flash:EOS-4.12.1.swi
D.
SWIX=flash:EOS-4.12.1.swi
Answer:
B
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 11
What is the default spanning-tree mode on an Arista switch?
A.
STP is disabled
B.
PVST
C.
RPVST
D.
MST
Answer:
D
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 12
What is required in order for Multi-Switch CLI to be implemented?
A.
One or more Arista products with management xmpp enabled.
B.
an XMPP-based server such as EJabberd
C.
an instant messaging client such as Admium or Trillian
D.
an SSD drive to the extensive logging produced by this feature.
Answer:
B
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 13
Which of the following statements is true with an Arista switch that has no configuration, but has booted with ZTP disabled?
A.
You may login directly as root, but only when using SSH.
B.
You may login as root, but only if you login as admin first.
C.
You can run root-level commands without a password after logging in as root.
D.
You cannot issue root-level commands until you add a user with a password.
Answer:
D
User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
0/ 1000
Question 14
What Arista feature helps with the diagnosis of microbursting events?